Reunion (эмулятор + мультипротокол для ReHLDS)

Сообщение #1 **andrey** » 29.05.2017, 02:03

Команда разработки:

Crock

Asmodai

s1lent

Описание:

Reunion является продолжением DProto для ReHLDS.

47/48

Crock

Особенности:

Поддержка всех известных steam/non-steam клиентов.

Поддержка 48/47 протоколов.

Эмуляция AuthID по железу клиента. Для этого на клиенте должен быть установлен один из поддерживаемых эмуляторов.

Эмуляция AuthID по IP-адресу клиента. Для каждого типа клиента можно выбрать свой AuthID.
Например, для клиентов 48 протокола сделать STEAM_ , а для 47 — VALVE_ , либо вообще не пускать их на сервер.

Гибкая настройка разрешенных типов авторизации и префиксов для них.

Выбор протокола ответа на запрос к серверу.

Требования:

Движок ReHLDS 653 или новее.

MetaMod 1.20(p) или новее.

Установка:

Подробнее...

CVAR:

Подробнее...

Конфигурационный файл:

Подробнее...

# ========================================================
# REUNION CONFIGURATION
# ========================================================

#
# General rule for modifying this file:
# DONT CHANGE ANYTHING IF YOU DONT KNOW WHAT IT MEANS!
#

# ========================================================
# AUTHID MANAGEMENT
# ========================================================

# ClientID types (for cid_* options)
# 1: Real (or generated by HW) steam (STEAM_xx:xx:xx)
# 2: Real (or generated by HW) valve (VALVE_xx:xx:xx)
# 3: STEAM_ by IP
# 4: VALVE_ by IP
# 5: Deprecated - client will be rejected
# 6: reserved for future use
# 7: HLTV
# 8: STEAM_ID_LAN
# 9: STEAM_ID_PENDING
# 10: VALVE_ID_LAN
# 11: VALVE_ID_PENDING
# 12: STEAM_666:88:666

# Use these options to set authid's for clients

### AUTH CONTROL ###

# For Legit Steam clients (default is real STEAM_xx:xx:xx [1])
cid_Steam = 1

# Client recognized as pending when they sucessfully authorized, but did not get steam id
# REMARK: Actually, it got steamid, but it is useless (STEAM_0:0:0 for example)
# default is STEAM_ID_PENDING [9]
cid_SteamPending = 9

# for HLTV (default is HLTV [7])
cid_HLTV = 7

# for p.47 clients that do not support unique id generation (default is STEAM_ID_LAN [8])
cid_NoSteam47 = 8

# for p.48 clients that do not support unique id generation (default is VALVE_ID_LAN [10])
cid_NoSteam48 = 10

# For players having revEmu ( >= 9.74) on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_RevEmu = 1

# For players having RevEmu 2013 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_RevEmu2013 = 1

# For players having SteamClient 2009 / revEmu > 9.82 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SC2009 = 1

# For players having old revEmu on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_OldRevEmu = 1

# For players having hCupa's SteamEmu on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SteamEmu = 1

# For players having AVSMP (Cracked Steam) on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_AVSMP = 1

# For SETTI ServerScanner
# default is STEAM_xx:xx:xx generated by IP [3]
cid_Setti = 3

# For SXEI Clients
# default is real STEAM_xx:xx:xx [1]
cid_SXEI = 1

# For players having SmartSteamEmu > 1.2.4 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SSE3 = 1

### AUTH SETTINGS ###

# ServerInfoAnswerType (0/1/2)
# Sets server answer type for query requests
# 0 = New style (Source Engine)
# 1 = Old Style (Fix favorites list for p.47 clients)
# 2 = Hybrid mode - Server is visible anywhere, but there are 3 packets generated for every serverinfo request
ServerInfoAnswerType = 0

# EnableSXEIdGeneration (0 / 1)
# Turns on steamid generation based on info sent by sXeI client
# Enable this ONLY if you have sXeI server installed!
EnableSXEIdGeneration = 0

# SC2009_RevCompatMode (0 / 1)
# Enable fix to make steamids generated for SC2009 compatible with revEmu
SC2009_RevCompatMode = 1

# SteamIdHashSalt (string)
# Salt string for SteamIDs hashing. Irreversibly changes SteamIDs. Applies only to SteamIDs generated by emulators.
# Should be more than 16 chars length. If string is empty, hashing is not applied.
SteamIdHashSalt =

# EnableGenPrefix2 (0 / 1)
# Enable second prefix (0 or 1) for generated by HW authids. Reduces chance of authid collisions.
EnableGenPrefix2 = 0

# HLTVExcept_IP (ip addr)
# HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated)
HLTVExcept_IP = 127.0.0.1

### AUTHID PREFIXES ###

# IPGen_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by IP
IPGen_Prefix1 = 0

# IPGen_Prefix2 (int)
# STEAM_a:b:c
# second prefix (b) for authids generated by IP
IPGen_Prefix2 = 4

# Native_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by native auth method (Steam)
Native_Prefix1 = 0;

# RevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by Steamclient 2009
SC2009_Prefix1 = 0;

# RevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by RevEmu
RevEmu_Prefix1 = 1;

# RevEmu2013_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by RevEmu2013
RevEmu2013_Prefix1 = 1;

# OldRevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by old RevEmu
OldRevEmu_Prefix1 = 2;

# SteamEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by SteamEmu
SteamEmu_Prefix1 = 3;

# SteamEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for AVSMP Clients (Cracked steam)
AVSMP_Prefix1 = 4;

# Setti_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for Setti server scanner
Setti_Prefix1 = 5;

# SXEI_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for sXeI clients
SXEI_Prefix1 = 6;

# SSE3_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for SSE3
SSE3_Prefix1 = 7;

# Note that banid will use steamid WITHOUT any prefixes!

# ========================================================
# OTHER STUFF
# ========================================================

# LoggingMode:
# 0 = None
# 1 = Console
# 2 = Log Files
# 3 = Both
LoggingMode = 2

Команды:

Подробнее...

Изменения:

Подробнее...

FAQ:

Нажмите здесь чтобы увидеть полный текст

Благодарности:

dreamstalker за проект ReHLDS

Crock / Lev за Dproto и всем остальным людям, которые помогали в развитии dproto.

kazakh758 за помощь с тестированием фикса зависания клиентов с кривым сервербраузером

English Topic

Текущая версия 0.1.75:

fix_scripts.zip: (7.84 КБ) 38 скачиваний

fix_scripts.zip: (7.84 КБ) 38 скачиваний

reunion_0.1.66.zip: (201.11 КБ) 28 скачиваний

reunion_0.1.66.zip: (201.11 КБ) 28 скачиваний

reunion_0.1.67.zip: (202.45 КБ) 28 скачиваний

reunion_0.1.67.zip: (202.45 КБ) 28 скачиваний

reunion_0.1.73.zip: (204.92 КБ) 28 скачиваний

reunion_0.1.73.zip: (204.92 КБ) 28 скачиваний

reunion_0.1.74.zip: (205.93 КБ) 31 скачивание

reunion_0.1.74.zip: (205.93 КБ) 31 скачивание

reunion_0.1.75.zip: (205.71 КБ) 28 скачиваний

reunion_0.1.75.zip: (205.71 КБ) 28 скачиваний

Источник:
Dedicated-Server.ru

Reunion (эмулятор + мультипротокол для ReHLDS)

Reunion (эмулятор + мультипротокол для ReHLDS)

Кто сейчас на форуме